Welcome to the Formlabs Family; Introducing the Form Wash L and Form Cure L

Form 3L and Form 3BL: A Complete Ecosystem for Large Part Production, Now With Automated Post-Processing



With today’s launch of the Formlabs automated large format post-processing machines, Form Wash L and Form Cure L, the Form 3L and Form 3BL ecosystems now streamline the 3D printing workflow to produce ready-to-use parts with minimal intervention. Form Wash L automates the removal of residual resin after printing while Form Cure L completes the curing process to help parts achieve peak mechanical properties and dimensional accuracy.


Lets have a closer look at the Form Wash L:


All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.


Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.


Additional Features on the Form Wash L:

    • Washing Guidlines included on UI
    • Wash Count is tracked for each batch of fresh solvent
    • Gasketed inner and outer lids
    • Wifi for easier firmware updates
    • Sound plays when wash and dry is complete

Now for a closer look at the Form Cure L:


Form Cure L uses two 500W heaters and high-powered UV lights alongside a reflective inner cavity and rotating turntable to provide a consistent, high-intensity cure.


Whether it’s for large prints or high throughput production of smaller parts, Form Cure L can be used with all of your Formlabs SLA 3D printers.


form cure L Form Cure L


Additional Features:

    • Front door blocks UV light and resists damage from resins/solvents
    • Preheat cycle included to improve part properties
    • Presets for all Formlabs resins
    • Wifi for easier firmware updates
    • Sound plays when curing is complete


To find out more about Formlabs large format printing ecosystems, request a Formlabs sample, call us on 01765 694 007, or send us an email at sales@additive-x.com. You can also book a discovery call with our Formlabs specialists Elaine Rutledge or Tammy O’Neill.

Elaine RutledgeBook a call with Elaine Book a call with Tammy